Universal Aftermarket Fuel Tank Gas Gauge Level Sender Unit

Description

Fuel Tank Sender Assemblies feature 240 ohms empty, 33 ohm full sender, Adjustable depth from 6" to 24", Can be used as a right hand or left hand swing unit with minor adjustment, This fuel sender comes with a seal and all mounting hardware, Works with our part #910-65042 fuel gauge
Universal Aftermarket Fuel Tank Gas Gauge Level Sender Unit
Sku # 91065082
Mfr. Part # 91065082
Condition
New
Brand
Speedway Motors
Sold
Each
Details
Notes
How deep is your tank?
Measure the depth of your tank where the fuel sender arm will be located. Choose the sender with an operating range which includes that dimension.
Right or Left-swing arm?
Most fuel gauge senders attach with a 5-screw pattern. Two of these screws are farther apart than the other three. Position yourself such that the 2 wider-spaced holes are closest to your chest; a right side sender will have the arm (or "float") extending to your right, and a left side sender will have the arm extending to your left. This only matters when replacing an existing sender. A first-time installation can use either one, just drill the mounting holes accordingly.
LH/RH Swing Guide (Link)
OHM
The OEMs used several different resistance ranges for fuel level indication over the years. However, some of the aftermarket gauge manufacturers follow the common Stewart Warner values (240 ohm empty, 33 ohm full). The gauges and senders that we carry (385 & 391’s) use these standard Stewart Warner values.
Ohms Chart (Link)
Info
These sending units are also included in our 910-65042 fuel level gauge kit. They will work in tanks from 6" to 24" deep and can be used as a right hand or left hand swing unit with minor adjustment. This fuel sender comes with a seal and all mounting hardware.
240 ohms empty, 33 ohm full
Adjustable depth from 6" to 24"
Right or left hand swing
2-3/4" flange OD
Overall Length: 15.50"
Includes sealing gasket and mounting hardware
Learn more about selecting the proper fuel sending unit by reading our tech article, Fuel Sending Units.
Charts
WARNING: Cancer and Reproductive Harm -- p65Warnings.ca.gov
California Customers: This part has been identified as emissions sensitive and can only legally be installed on race-use only vehicles, off-road-use only vehicles, or pre-1965 vehicles in the State of California in accordance with the California Air Resource Board (CARB) requirements. Once your order is placed you will be contacted by Speedway Motors within 2 business days so that you can certify that you will only use such parts on these types of vehicles in California.
Specs
Sold in Quantity
Each
Ohm Range
240 empty, 33 full
Overall Length
15.50
Height Adjustable
Yes
MFG. Part #
91065082
Reviews
IF needed I would Buy Again
Rated
by LDH on January 11, 2021
Summary:
Yes
Yes, I recommend this product.
I would buy again!!!
Rated
by Carl on November 24, 2020
Summary:
I have a custom made tank on a 1929 Mercedes Benz Gazelle Replica. The sender was very easy to fit my dimensions and works perfectly.
Pros:
Fully adjustable for all tank sizes
Yes, I recommend this product.
Great part, definitely will buy another from you.
Rated
by Harry on October 23, 2020
Summary:
Perfect fit, high quality construction and mounting.
Yes, I recommend this product.
Works great. Easy to install.
Rated
by Rex on May 04, 2020
Summary:
Have a 48 Ford Coupe. Needed to replace leaking gas tank. Replaced sending unit at same time. Worked great with my auto meter gauge.
Yes, I recommend this product.
Works great
Rated
by CHris on December 04, 2019
Summary:
only one tank since it was installed but seems to be working great. Instructions were very clear.
Yes, I recommend this product.
Related Items / Suggested Parts
Speedway Fuel Level Gauge with Sender, 2-1/16 Inch, White
Classic Instruments SN33G 5-Bolt Fuel Sending Unit Gasket
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.