Irritec P1 5/8" drip tape 15 mil 6" Spacing 0.25 GPH 500' Roll

Description

Irritec's 5/8" P1 Drip Tape is available in a wide range of wall thicknesses from 6 mil to 15 mil, many different emitter spacings, and several flow rates. With this many options, P1 drip tape will meet your needs!
P1 drip tape utilizes innovative technology offering many benefits to the grower. A protected flow system devised by the Irritec research department allows the P1 to be buried in the soil without problems caused by encroachment of mud and debris and reduces the risk of root intrusion to a minimum. The system works through a special flap design on the outlet hole. During the irrigation cycle the flap opens, allowing an even flow of water; when the cycle ends the flap returns to its resting position, closing the hole and thus blocking any entry of mud and detritus. This drip tape is great for better coverage on longer runs. When you water slower and longer, you also water deeper. P1 Ultra Tape works with T-Tape, Aqua Traxx and Chapin Drip Tape Systems. If you are a first time user of drip tape, we recommend that you start with our 15 mil tape.
Features:
P1 drip tape has no seams for more reliability and uniform installation
P1 drip tape is manufactured using injection molded drippers for a high degree of plugging resistance and uniform water distribution over long runs
P1 drip tape is used in both above ground and subsurface installations with equal success
The low profile drippers welded on the inside wall keeps friction loss to a minimum
Each dripper has an integrated inlet filter to prevent clogging
The turbulent flow path design is effective against clogging even at low pressures
All P1 is resistant to UV rays and mechanical stress
Drip Emitter CV's are 2.5% or less
Ideal for use in any applications where the row is straight
Drip tape is not well-suited for curves or bends.
Optimum Operating Pressure is 8 to 15 PSI based on mil thickness