Chevy Tahoe Avalanche Suburban 07-13 Bluetooth RGB LED FOG light Halo Ring Kit

Description

Halo kit fits
2007-2013 Chevy Suburban/Tahoe/Avalanche,
10-15 Camaro,
15 Colorado/Silverado,
07-12 GMC Acadia,
14-15 GMC Sierra,
07-10 Ford Escape,
08-09 Pontiac G8
Kit includes everything needed for instal of fog light halo rings
4.0 Bluetooth controlled from your phone
If you have any issues or questions contact us and we will instantly help you
INSTRUCTIONS WILL BE SEND TO YOU ONCE YOU BUY THIS ITEM. With graphic pictures and detailed info
These are 100% waterproof and will hold up to the weather.
(INSTRUCTIONS INCLUDE PICTURES ONCE Purchased)
Instructions fog light
Please download Led Lamp. You can scan your led controller box or go to your play store or Apple store. (This is the app your Bluetooth halo rings will work through)
#1 begins by uninstalling your fog lights for easy excess. You can also leave them your truck. Might be slightly more difficult
#2 please clean outside of fog light. Use window cleaner or something similar to get rid of dirt/grime.
#3 when manufacturing these halo rings we try to make them universal so at this point we need you to remove the small taps on the back side of the halo ring.(I used a small angled pliers) there should be 3 tabs on each halo
#4 remove the double sided tape from the halo. Than take off the protective adhesive paper, instal back onto halo ring as even and nice as possible. (This needs to be good or halos will fall off or failure may occur)
#5 this is the important step. First remember exactly we’re you would like your wires to come through. In our case we put the wires on the bottom of the fog light so people won’t see it. Now Please remove the protective paper from the double sided tape, now carefully Install on halo on fog light. Evenly position it on light. Apply even pressure on the halo ring until it is firmly in place. (Once and done. The more you move it the more likely it will not stay)
I#6 reinstall fog lights on your pickup, most to all pickups have a 1/8in fitment gap around there fog lights in that space please feed your halo wire through. If there is not enough space drill a small hole. Plug both sides into the led controller box. Secure the Wires to a spot we’re sticks and other items won’t be able to rip them down.
#7 now that your lights are in and wired up. You need to mount your controller box. It needs to be to a solid place where it will not be in the weather. Preferably inside your engine bay.
#8 now it’s time to wire your kit should have included a small white cord that plugs into your controller box. It has a red wire and a black wire. Red=positive black=negative 12v dc power. You can go directly to your battery and have constant power or wire it inside using a toggle switch.
I hope this helps you please contact me with any issues of your product.